MECHANICAL TESTING LABORATORY

Due to the very large number of tests offered, descriptions of those most commonly requested have been gathered into the following groups:

ASTM E21 – Tensile Testing of Metals at Elevated Temperatures (up to 2500 °F)

To request a quotation for any test email info@trl.com for a prompt reply

 

Touchstone Research Laboratory has performed tens of thousands of tensile tests in its mechanical testing laboratories in a wide variety of materials.

Touchstone is equipped to perform elevated tensile tests from cryogenic temperatures up to 2500°F. Touchstone is also equipped to perform thermal fatigue as well as tensile testing in a wide array of environments.

ASTM E21 covers the procedure and equipment for the determination of tensile strength, yield strength, elongation, and reduction of area of metallic materials at elevated temperatures.

The elevated-temperature tension test gives a useful estimate of the static load-carrying capacity of metals under short-time, tensile loading. Using established and conventional relationships it can be used to give some indication of probable behavior under other simple states of stress, such as compression, shear, etc. The ductility values give a comparative measure of the capacity of different materials to deform locally without cracking and thus to accommodate a local stress concentration or overstress: however, quantitative relationships between tensile ductility and the effect of stress concentrations at elevated temperature are not universally valid. A similar comparative relationship exists between tensile ductility and strain-controlled, low-cycle fatigue life under simple states of stress. The results of these tension tests can be considered as only a questionable comparative measure of the strength and ductility for service times of thousands of hours. Therefore, the principal usefulness of the elevated-temperature tension test is to assure that the tested material is similar to reference material when other measures such as chemical composition and microstructure also show the two materials are similar.

Please email info@trl.com or call (304) 547-5800 for information regarding test procedures, results, specimen information, pricing or any other ASTM E21 questions you may have.

Reference: ASTM E21 – Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials