Accelerated Life Testing
Salt Spray Testing
Heat Treatment Studies
Paint & Coatings
Due to the very large number of tests offered, descriptions of those most commonly requested have been gathered into the following groups:
To request a quotation for any test email email@example.com for a prompt reply
ASTM D4476 is used to measure the flexural properties of fiber-reinforced pultruded plastic rods. The specimen used is a rod with a semi-circular cross section, molded or cut from lengths of pultruded rods.
Flexural properties determined by this test method are most commonly used for quality control and specification purposes. Some of the parameters that can cause variation in flexural properties are: temperature, atmospheric conditions, specimen depth, and differences in rate of straining.
Touchstone has experience in the techniques necessary to achieve proper results. Improper loading will generally result in lower than expected values.
Please email firstname.lastname@example.org or call (304) 547-5800 for information regarding test procedures, results, specimen information, pricing or any other ASTM D4476 questions you may have.
Reference: ASTM D4476 – Standard Test Method for Flexural Properties of Fiber-Reinforced Pultruded Plastic Rods